Schedule Here

 

 

We have uncovered this great article pertaining to No Hot Water — Water Heater Repair below on the web and decided it made sense to talk about it with you on this page.

Lots of modern-day residences make use of an electric water heater for their heating unit, because of its comfort and also convenience of use. However, just like any other electrical home appliances, issues might emerge with its use, unexpectedly. It can be really aggravating to get up to a chilly shower rather than a hot one or having your bathroom with water that isn't warm sufficient or even also warm. Whatever the instance may be, water heater problems can be quite nerve-racking. Thankfully, we've made a list of feasible solutions to your water heater issues. There are a number of factors that could cause a lot of these problems, it could be an issue with the power supply, the electrical burner, or the thermostat. Prior to doing anything, guarantee you switch off the major power supply for safety and security. Whatever the trouble is, getting it fixed ought to not position excessive of an issue if you follow these steps:

 

Call A Professional:

If after replacing all defective parts and resetting your temperature, the water heater still isn't working, you may need to contact an expert plumber for a professional point of view. The trouble with your heating system could be that the cold and hot faucets have actually been changed or it might be undersized for the amount of hot water needed in your home. Whatever the case might be, a specialist plumber would certainly assist fix the issue.

 

Inspect Your Power Supply:

As basic as this may appear, it is really essential. Without appropriate power, your water heater will not function. So the first thing to do when your water suddenly retires is to verify that it isn't a power issue. Check if the fuse is blown out or the breaker stumbled. If the circuit breaker is the issue, simply transform it on and off once again. Replace any broken or damaged fuse. Check the home appliance with power after these changes to see if it's currently functioning.

 

Inspect Your Thermostat:

If your water heater still isn't functioning or the water appearing isn't hot enough, you might need to check the temperature level setups on your upper thermostat. Ensure the breaker is turned off before doing anything. Open up the gain access to panel as well as press the red button for temperature level reset above the thermostat. This should aid heat up the water. Turn the breaker back on as well as check if the trouble has been dealt with.

 

Examine the Heating Element in the Water Heater:

If it's not a power trouble, after that attempt having a look at your burner if it is still working. Examine each of your heating elements to ensure the issue isn't with any one of them. If any of them is damaged, replace that component and then inspect whether the hot water is back on.

 

Conclusion

Hot water heater problems are not always significant. A lot of them are because of small problems like a blown fuse or damaged heating element. Changing the damaged parts need to do the trick. Nevertheless, if you are still not able to solve the issue, give a call to your nearest plumber to find to get it fixed.

 

Common Reasons Why Your Hot Water Heater Isn’t Working

 

Water Gets Too Hot

 

Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.

FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.

 

Water Doesn’t Get Hot

 

This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).

FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.

 

Leaking Water Heater

 

A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.

FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.

 

Noisy Water Heater

 

Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.

FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.

 

Pilot Light Keeps Going Out

 

Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.

FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.

 

Water Smells Bad

 

The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.

FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.

 

Water Looks Brown Or Rusted

 

The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)

FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.

https://www.huskyair.com/blog/hot-water-heater-isnt-working/

 

As a fervent person who reads about What Would Cause My Electric Water Heater to Stop Working?, I thought sharing that segment was essential. Are you aware of somebody else who is sincerely interested in No Hot Water — Water Heater Repair? Why not share it. Thanks a lot for taking the time to read it.

Get Your Estimate Now